Five Advantages Of Vertical Impact Crusher

Five Advantages Of Vertical Impact Crusher

Analyze the five advantages of vertical impact crusher

Vertical counter-breaking is a new type of high-efficiency crushing equipment. Based on the novel design principle, it adopts the new concept crushing technology to meet the requirements of multiple crushing and new grinding processes. It not only has large production capacity, but also has low unit power consumption. Meet the requirements of energy saving and emission reduction in a large environment. Vertical impact crusher has a good application prospect in the field of mineral processing. Through large-scale engineering and long-term practice, it gradually shows the five advantages of vertical impact crusher, as follows:

First, the wide range of applicable materials

The vertical counter-breaking plate hammer is fixed on the rotor by mechanical clamping structure. When it rotates with the rotor, it has a large moment of inertia. Therefore, the material with higher hardness and the soft material have the same ideal crushing effect; Shanghai World State impact crusher breaks the vertical vertical impact crusher of the manufacturer. When dealing with materials with large moisture content, there is no need to configure the sieve plate. As long as a heating device is installed between the counter-breaking feed port and the impact crusher, the adhesion of the material can be reduced. To prevent the occurrence of machine blockage.

Second, the discharge granularity adjustment has strong flexibility

The vertical counter-attacking method of adjusting the particle size of the material is very flexible and can be realized in various ways, such as adjusting the rotor speed, adjusting the gap between the counterplate and the grinding chamber. The gap adjustment can be adjusted mechanically or hydraulically, and the hydraulic adjustment system can be used to easily adjust the gap by operating the button or the travel control system.

Third, the structure is simple and easy to maintain

Only six hammers are installed on the vertical counter-breaking rotor. The special tool can be used to easily replace the hammer. It takes only one shift to replace the set of hammers. The replacement of the grinding rods in the bottom grinding chamber takes only tens of minutes. Significantly reduced the time and cost of inspection and maintenance.

Fourth, the wearing parts are light and long-lived

The wear of the vertical counter-breaking hammer only appears on the side facing the material. When the rotor speed is normal, the feed will fall to the surface of the hammer (the striking surface), and the back and sides of the hammer will not be worn. Even the wear on the side of the material is minimal, and the bottom grinding rod is easy to replace. Due to the lighter wear of the hammer, the metal utilization can be as high as 45% — 48%, thus greatly extending the service life and reducing the economic cost of maintenance of the user equipment.

Fifth, the production capacity is large, the product shape is good

The vertical impact breaks the crushing equipment of low-speed and multi-crushing chamber impact type, and its linear speed is reduced by 20%-25%. The crushing is relatively large, which can make the three-stage crushing into two sections or a section of crushing, and obtain higher production. The ability to counter-break the function of breaking and shaping, the material repeatedly impacts between the impact crusher plate and the rotor, and successively crushes the stage counter-attack chamber, the second-stage counter-attack chamber and the bottom grinding chamber to achieve the required discharge granularity. Moreover, the shape of the product is mostly cubic and the shape of the particles is good.

Related Articles

  1. Impact Crusher Operation
  2. Small Construction Waste Crusher Advantage
  3. Jaw Crusher Capacity

Related Machine